If you look up boarding ladders, you’ll find a confusing array of models. Some are made of stainless steel while others are made of aluminum. Metals don’t have to be limited to boarding ladders. Window frames drink holders, table and seat pedestals, grab rails, rod holders, and other boat accessories are all available in either aluminum or steel. Also, for a customized board tower, you may have to choose between aluminum and wood.
Metals are used in every corner of the boat along with the best quality wood. However, the only concern is the quality of metal that doesn’t rust in atmospheric conditions like humidity, mist, rain saltwater, etc. nowadays all stylish boats are made of steel or aluminum, but traditional yachts owners still believe that silicone bronze is easy to maintain.
Fair Wind Fasteners in Newport, Rhode Island follows the same traditional rule of focusing on making silicone bronze screws for boat building and repairing. They believe in quality and not quantity. Various competitors sell screws made of different alloys, but Fair Wind Fasteners still believes in bronze screws. You will get all types of screws in their store which can be used for various clamping and screwing.
Different Meal and its Importance
Aluminum – Pros and Cons
Aluminum is 66% lighter than stainless steel, which may be necessary if you want to keep the weight down. Aluminum is also more cost-effective than steel. The majority of towers, hardtops, and T-tops are composed of aluminum to minimize weight in the air and keep the center of gravity as low as possible.
However, aluminum is a soft metal that is easily scratched or peeled. When a surface is broken, it is susceptible to current corrosion, which results in a white, crusty appearance that will eventually separate from the broken space. This increases in an environment with a lot of seawater.
Stainless Steel – Pros and Cons
Stainless steel is best used at any place where greater strength is required. It is used particularly where bending resistance is required. This includes anchor rollers, deck hardware, and seat hardware. Stainless steel also outperforms aluminum in terms of scratch and dent resistance.
On the other hand, it is more expensive and, three times heavier than aluminum. When utilized for constructions such as vehicle frames, it not only adds weight to the structure, but also causes stress, which can lead to fiberglass fractures with time. This is why boat owners reinforce the fiberglass at support points.
Make sure the stainless steel in the accessories is polished well. this is because the chromium in the alloy combines with the oxygen in the air to form an invisible chrome-oxide surface layer that improves corrosion resistance. It is easy to remove surface corrosion if it appears in future on steel coats.
On the other hand, aluminum requires excessive polishing to resist corrosion. Check thoroughly to see if it’s anodized or powder-coated. Anodizing involves elements dipped in a chemical bath that oxidizes the surface, but with an attractive texture and effulgence. In powder-coating, a spray coating of powder is burned to melt and blend with the metal surface. Powder coating can be repaired easily.
No matter what metal you choose for your boat, make sure you know everything about it and how to maintain it. Buying a boat is an investment, and therefore it should be handled with care.